Casa> Blog
September 24, 2021
Check valve principle check valve structure check valve feature check valve application check valve construction

PVC Check valves, also known as check valves or check valves, are designed to prevent backflow of medi

September 22, 2021
Selection and application of pneumatic diaphragm control valve

As the degree of industrial automation continues to improve, as the final actuator of automatic control system, control valve gets more and more widely used. The application of control valve is direct

September 22, 2021
Analysis of common problems of pneumatic diaphragm valve

Common malfunctions First, the gas source system is faulty 1. The instrument wind line is blocked. Since the ball valve has a throttling effect at the end of

September 22, 2021
Comparison of hard seal ball valve and soft seal ball valve

1. Structural mechanism The hard seal of the ball valve is the seal between the metal and the metal. The seal ball body and the valve seat are all metal. Processing accuracy and process are more diffi

September 22, 2021
The difference between two-piece and three-piece pneumatic ball valves

Pneumatic two-piece ball valve | Two-piece pneumatic ball valve | The difference between two-piece and three-piece pneumatic ball valves: One-piece ball valve, two-

September 18, 2021
Ball valve structure and characteristics

(1) ball valve fluid resistance is small, with the lowest flow resistance (in fact, zero) ball valve generally has reduced diameter and non-reduced channel two structures. No matter what kind of struc

September 18, 2021
Pneumatic ball valve performance

Pneumatic ball valves are becoming more and more important in normal use. They gradually replace other valve types, which have more advantages. Pneumatic ball valve

September 18, 2021
Talking about the Application of Pneumatic Diaphragm Control Valve

With the continuous improvement of the degree of industrial automation, regulating valve as the final executing mechanism of the automatic adjustment system has been more a

September 17, 2021
What is a diaphragm valve?

Diaphragm valve is in the valve body and the valve cover with a flexible diaphragm or a combination of the diaphragm, the closing member is connected with the diaphragm of a compression device. Seat c

September 17, 2021
Butterfly valve and ball valve difference

Butterfly valve definition: Butterfly valve (English: butterfly valve) refers to the closure (valve or disc) for the disc, rotating around the valve shaft to achieve a valve on and off, mainly in the

September 16, 2021
Plastic ball valve maintenance knowledge

The custodial personnel should check the model, appearance, and weight of the valve in time, and also perform strength test box leak test on the plastic ball valve together with the test personnel. Fo

September 16, 2021
Is the plastic diaphragm valve properly installed and used?

Is the plastic diaphragm valve properly installed and used?

September 16, 2021
Explain the installation steps of pneumatic UPVC/PVC plastic wafer butterfly valve

Explain the installation steps of pneumatic PP to the butterfly valve Pneumatic PP on the butterfly valve is one of the common valve types in the industrial pipeline. The pneumatic

September 15, 2021
Plastic ball valve maintained in custody

Plastic ball valve maintained in custody After the plastic

September 15, 2021
How to design fluorine plastic lining butterfly valve?

Fluoroplastic lined butterfly valve design: 1, Overview: With the rapid development of the modern petrochemical industry, some of the media used in special conditions are highly corrosive, even stainl

September 15, 2021
insulation ball valve working environment

With the continuous development of the domestic industry, the demand for the thermal ball valve used on the pipeline has also increased, and the requirements for the thermal insulation ball valv

September 14, 2021
Pressure relief valve, emergency shut-off valve and emergency opening valve settings

Abstract: Relief valves, emergency shut-off valves and emergency opening valves are the valves developed and applied in recent years. They have drawn much attention from the construction and fire wate

September 14, 2021
cancel the valve at the end to improve efficiency

1. Cancel the bottom valve, the valve resistance coefficient at the end of the larger, generally reduce the head of about 1.5 meters. The efficiency of the pump will be significantly improved after th

September 14, 2021
Pneumatic butterfly valve and pneumatic ball valve

Pneumatic butterfly valve is a kind of valve that uses disc-type opening and closing parts to reciprocate to rotate about 90 ° to open, close and adjust the fluid channel.

September 13, 2021
Characteristics of water treatment pumps and technology trends

I. Introduction Water pumps are important equipment for transporting fluid in water treatment and supply energy to the fluid to overcome the resistance in flow and keep the flow in the equipment or pi

September 13, 2021
New water treatment process: gravity three valve automatic filter filtration

Improved filter, expanding the bottom of the porous plate and the distance between the floor, easy to install and maintain. Filter procedures procedures shown in Table 1. Abstract: In order to overcom

September 10, 2021
Facing water and sewage (waste) water treatment

Water and sewage treatment are closely related to the people's production and life. Therefore, it is required that the supplier of electrical instrument control system solutions has rich industry appl

September 10, 2021
Water safety and water treatment

Speaking of water safety, we must first consider whether the water source is toxic, and determine whether the water source is toxic. We can inquire and observe the upper reaches of water sourc

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Invia